Notice : Following contents of installation instruction are written, drawn and shot by www.focusingscreen.com ,and it's copyrighted by Focusing House. Welcome to browse on line and you are "NOT" permitted to copy the pictures and contents for making other uses
SONY α200 Focusing Screen Installation Instruction
~~Please prepare~~
1.Please prepare we send to your focusing screen and the accessories.
2.The sweeps tool.
~~Install procedure ~~
<P1>This is the SONY α200 camera.
<P2>Please reverse and Standing this camera.
<P3>You can be careful to see the structure of inside
<P4>Flat edge insert into the eyelet of switch and pushing to inside.
Or use a thumb operation can be also~ After opening a spring lock can take out spare parts.
<P5>This is the spare parts for taking out.~~
<P6>Take out foam
(Foam in the accessories box)
<P7>Take out a bar of foam
<P8>Stick to the focus point screen the right side.
<P9>Why want to do so??? Because camera's lose the original "focusing screen", "focus point screen" will loosen to move
,so need to fix it !!!
<P10>This is the SONY α200 X-700 focusing screen.
<P11>Please watch for picture,The Spare parts number is the sequence of install.
<P12>Put a focus point screen first.
<P13>Put yellow slice.
<P14>Put white slice.
<P15>Please clip the focusing screen edge and put the inside of the camera.
<P16>Putting the spring slice returns.
<P17>Put its original position.
<P18>Fix screens lock with the thumb of left hand is all right.
<P19>Don't forget to want a thumb to put on "fingerstal".(There is fingerstall in the focusingscreen accessories box )
<P20>Operate carefully until it locks in place.Have already completed now ^ ^
ps:
SONY α200 change focusingscreen will not influence AF-Focus and focus point operate.
2008/02/23